Keyspan usb serial adapter

Turn off the PalmConnect, USB, and Internal Modem connections by unchecking their check boxes. Then turn ON the Keyspan serial port name (see Step 1) by checking its check box. Then click on the Keyspan serial port name and click on the Settings button. This will open the settings window as shown below: In the settings window, make sure that the Connection menu is set to SERIAL. The list of numbers below is the list of available baud rates. *** IMPORTANT *** Page 20If you have a Keyspan USB PDA Adapter with the model number of USA-19, set the baud rate to 57600. For any other Keyspan serial port product (including the Keyspan USB PDA Adapter model numbers USA-19Q and USA-19Qi), set the baud rate to As fast as possible. NOTE: The easiest way to determine the model number of your Keyspan serial adapter is to turn it over. On the back of the adapter is FCC, CE, and other information. The part number is listed as "P/N: USA-XXxx". Once you have selected the correct baud rate, click the OK button to return to the Connection Settings window. Then click on the HotSync Controls tab. At the HotSync Controls tab, select the Enabled button as shown below: Step 4 - HotSync Your Palm Organizer Palm Software configuration is now complete. To initiate a 'HotSync' session, place your Palm Organizer in its cradle and then press the HotSync button on the cradle. Your Palm Organizer will now "HotSync." Page 21Page 1 and 2: Warranty Registration: register onlPage 3 and 4: 1.1 - Introduction The Keyspan USB Page 5 and 6: If your software requires Classic aPage 7 and 8: 3.1 - Installation Instructions InsPage 9 and 10: 4.1 - Configuring Your Serial DevicPage 11 and 12: 5.1 - Keyspan Serial Assistant BesiPage 13 and 14: 6.1 - Problem Solving If you are haPage 15 and 16: 7.1 - Appendices · Configuration EPage 17 and 18: 7.1.b - Palm Desktop Before you begPage 19: The easiest way to access the HotSyPage 23 and 24: Click on the TRIANGLE to the left oPage 25 and 26: In the Modem tab, you will need to Page 27 and 28: 7.1.d - VirtualPC Keyspan Support FPage 29 and 30: *** IMPORTANT *** Note the serial pPage 31 and 32: Once you have selected the Keyspan Page 33 and 34: Once the Settings window is open,

Connecting to the SuperSting (All USB serial adapters)Required Items:SuperSting PC Com CableUSB serial adapter or a computer with a built in serial portPower source such as 12V deep cycle marine battery, SuperSting Office Power Supply or SuperSting AC Generator Power SupplyWindows computer with the latest version of SSAdmin available at the SuperSting User Area (for registered users). Firmware versions ending in .68 or newer must have SSAdmin 1.5.1.235 or newer.Comunication Mode: Set SuperSting Wi-Fi models to the PC COM position (Red #5 Above). All other SuperSting models are always in PC COM mode.To communicate with the SuperSting on a new laptop, you will most likely need a USB to Serial Adapter. We suggest the Tripplite Keyspan USA-19HS model or the Brainboxes US-101 model. For the BrainBox US-101, click HERE to choose the column US and then the type of Windows OS you have. Drivers: Drivers are available from the manufacturer or packaged with the device. Make sure you install the driver BEFORE plugging in the USB device so that the driver installs smoothly. The Keyspan adapter has a program to check functions and assign com port numbers call Keyspan Serial Assistant in the windows program menu. The Brainboxes adapter also has these same functions in a tab under the Ports > Com in Windows Device Manager. Check Com Port of Device: Type “Device Manager” in Windows Search as shown above.Open the Windows Device ManagerThe AGI SuperSting Administrator(SSAdmin) can utilize COM 1-15. If your computer defaults to a port >15, adjust

Tripp Lite Keyspan High-Speed USB to Serial Adapter NCNR TESSCO SKU: 548678 UPC: 672603000413 QTY/UOM: 1/each MFG PART #: USA-19HS USA-19HS The USA-19HS Keyspan® High-Speed USB-to-Serial Adapter allows you to connect a serial device to a computer or laptop with a USB Type-A port. Widely recommended by serial device manufacturers, the USA-19HS attaches to switches, routers, barcode scanners, GPS units, point-of-sale devices, lab equipment, network storage devices and other devices with a 9-pin serial port. The included 3-foot detachable cable supports data transfer speeds up to 230 Kbps—twice as fast as a built-in serial port. The USA-19HS works with any USB cable up to 16 feet. An LED indicates data activity. This adapter requires no external power and, at just 2 ounces, packs away easily in your laptop bag for use on the go. Windows line monitor and data trace software included. Easy to upgrade with free software downloads. Works with Windows (up to 10) and Mac OS (up to 10.11). Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.