Prusa slicer

Author: e | 2025-04-23

Download the archive, then run PRUSA Slicer. In PRUSA Slicer Help- Show COnfiguration Folder. This will expose the configuration folders PRUSA Slicer uses. QUIT PRUSA SLICER. Here’s a simple comparison of Orca Slicer with other popular slicers like Cura, Prusa Slicer, Bambu Studio, and Super Slicer. Feature: Orca Slicer: Cura: Prusa Slicer:

Prusa Slicer 2.8.1 - Download

Prusa slicer 2.5 slicing preview issue Prusa slicer 2.5 slicing preview issue Hi, I have a strange issue with prusa slicer 2.5. When 3 d model is added to the build plate everything is fine,but after slicing the model to print i can see that complete model is filled with infill in preview and estimate time for printing is 7h 30 min? Normally printing this part took about 4h.This exact model was printed previously day before with prusa slicer without any issues. I just cant find the reason for this problem. Can anyone help?Here is a link Log in to be able to post Posted : 13/03/2023 4:12 pm (@neophyl) Illustrious Member RE: Prusa slicer 2.5 slicing preview issue Please attach your zipped up project file. File>Save Project As. This will save a 3mf file. ZIP it up and attach it here. It must be zipped or the forum wont accept the file. It wont give any warning either, so best to check it actually attached immediately given how short the forums edit time is too.A 3mf from PS is a complete snapshot of ALL the settings. With it we can slice it exactly the same as you and we can see the preview etc and figure out what setting you have that is causing it hopefully. My guess though is that you have slicing set to fill holes. Print Settings>Advanced>Slicing>Slicing Mode. Should be on regular unless you need one of the special modes. Log in to be able to post Posted : 13/03/2023 8:30 pm Topic starter answered: RE: Prusa slicer 2.5 slicing preview issue Hi.Omg..You nailed it,it was slicing mode set to close holes. I didnt change this setting myself,well now it works thanks to you..Thanks 😎 Log in to be able to post Posted : 14/03/2023 4:27 pm (@neophyl) Illustrious Member RE: Prusa slicer 2.5 slicing preview issue Glad it was that simple. 🙂 Log in to be able to post Posted : 15/03/2023 8:51 am

Download Prusa Slicer 2.9.0

Prusa Slicer 2.6 Alpha 2 is available on Github It's likely @constructicon is not in expert mode. Log in to be able to post Posted : 01/02/2023 8:07 pm (@constructicon) Active Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github I was in the right version, the issue was that I wasn't in "Expert" mode so the setting was hidden. Log in to be able to post Posted : 01/02/2023 8:08 pm RE: Prusa Slicer 2.6 Alpha 2 is available on Github Of course... I was in Expert mode for so long that I forgot about the others. Glad you found the setting. Log in to be able to post Posted : 01/02/2023 8:11 pm (@sp4rkr4t) Estimable Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github So my first project I open up to have a play with organic supports has exactly gone great, with most of trhe supports ending a good 1cm before the overhanging part of the object.Going to try playing around a bit more to try and identify the cause. Log in to be able to post Posted : 02/02/2023 6:29 pm (@sp4rkr4t) Estimable Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github Should have done a bit more playing first, I turned off variable layer height on the parts and the supports generate fine now. Guess the two features clash somehow. I'll creat a github issue if there isn't one already. Log in to be able to post Posted :

Prusa Slicer 2.6.1 - FileHorse

Flow, and abrasive-resistant variants.**0.4mm nozzles are not recommended for fibre materials due to increased risk of clogging.Painless Bed Adhesion with PEI“Our spring steel PEI sheet ensures perfect prints every time. The stable and flat surface, combined with the PEI coating, allows for secure adhesion and easy removal of printed parts. No more messy adhesives or tapes needed.Our double-sided design offers flexibility, as you can choose between a smooth or textured finish depending on your project. And if ever a part sticks too well, simply flex the plate slightly and the part will fall off, making the removal process even easier.TechnologyConstruct 1Construct 1 XLTech SpecsBodyTool HeadBedBuild Plate Surface (side A)Build Plate Surface (side B)Max Build Plate TemperatureSpeedCoolingElectronicsAuto-Calibration FunctionalityAuto-Gantry-Calibration FunctionalitySoftwareFilamentBlank SpaceBlank SpaceBlank SpaceBlank SpaceBlank SpaceBlank SpaceAuthentic Duet 2 Wi-Fi or EthernetYes (disabled by default)Blank SpaceCura, Prusa Slicer, Orca Slicer, ++moreBlank SpaceOnly recommended with abrasive resistant nozzle versionsBlank SpaceBlank SpaceBlank SpaceBlank SpaceBlank SpaceBlank SpaceAuthentic Duet 2 Wi-Fi or EthernetYes (disabled by default)Blank SpaceCura, Prusa Slicer, Orca Slicer, ++moreBlank SpaceOnly recommended with abrasive resistant nozzle versions* Subject to user chosen nozzles. Shown spec is the standard model.** Subject to user eco-system choiceWe’d love to hear from you – ask us anything. Terms and ConditionsPrivacyCookiesTerms of UseAftersalesDownloads Page load link Go to Top. Download the archive, then run PRUSA Slicer. In PRUSA Slicer Help- Show COnfiguration Folder. This will expose the configuration folders PRUSA Slicer uses. QUIT PRUSA SLICER.

How To Use Prusa Slicer

Última Versión Prusa Slicer 2.9.0 Sistema Operativo Windows 10 / Windows 11 Ránking Usuario Haga clic para votar Autor / Producto Prusa Research / Enlace Externo Nombre de Fichero PrusaSlicer_Win_standalone_2.5.0.exe En ocasiones, las últimas versiones del software pueden causar problemas al instalarse en dispositivos más antiguos o dispositivos que ejecutan una versión anterior del sistema operativo.Los fabricantes de software suelen solucionar estos problemas, pero puede llevarles algún tiempo. Mientras tanto, puedes descargar e instalar una versión anterior de Prusa Slicer 2.5.0. Para aquellos interesados en descargar la versión más reciente de Prusa Slicer o leer nuestra reseña, simplemente haz clic aquí. Todas las versiones antiguas distribuidas en nuestro sitio web son completamente libres de virus y están disponibles para su descarga sin costo alguno. Nos encantaría saber de tiSi tienes alguna pregunta o idea que desees compartir con nosotros, dirígete a nuestra página de contacto y háznoslo saber. ¡Valoramos tu opinión!

Prusa EasyPrint - Online Slicer from Prusa - YouTube

Prusa Slicer 2.6 Alpha 2 is available on Github (@neophyl) Illustrious Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github Pretty awesome. The only gap for me with the new features is the lack of a female to female connector mode, ie. just 2 holes with the option to generate separate pins. This would make it easier to use magnets or print both parts with their cut sides flat on the build plate. Perhaps in an upcoming release. 👍 Log in to be able to post Posted : 31/01/2023 9:19 pm (@foxrun3d) Illustrious Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github Yes, and my first two attempts of slicing an old file ended up in crashes ☹️And shift-click to draw a cut line but NO similar thing to draw straight seams or supports?!? Makes me wanna cry… Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software... Log in to be able to post Posted : 01/02/2023 12:43 am RE: I know it's an alpha, just comparing notes with my fellow guinea pigs.It crashed a lot for me as well, more then 20 times in 2 hours just seeing if the projects I made in 2.4 & 2.5 would slice. 'Seams" are still not fixed from 2.5 wavy gravy 🙁 and it didn't like me rotating objects or parts, never really got to the new stuff, it was very fussy about geometry. It did not like certain shapes

Unable to log into Prusa connect from Prusa Slicer - GitHub

Most of the others. The difference being that the UI also has more advanced settings to do with the control of your printer, as well as the slicer settings. This can lead to some new users being “overwhelmed” by what they’re looking at and, as such, putting them off using it. The slicer itself though is pretty straightforward and offers automatic supports, speed and acceleration controls, hollowing and infill settings, light curing adjustments etc.NanoDLP automatic generated supports. Source: 3DprintingGeeKPros and ConsPros: Web based and Free to use Fairly easy to use UIGenerally easy to learnCons: Part of a bigger programNeeds additional hardware to work to full potentialPricingFree to use the software, but additional cost for Raspberry Pi and/or NANODLP board3. FormWare 3DFormWare was initially started as a company in 2014 after firstly making online, personalised jewellery. They then looked into how they could improve their production process through 3D printing; This was why FormWare 3D was developed in 2015. The software itself is fairly similar to others in terms of features but is dedicated solely to resin printers. This is good in terms of attention to detail, but there are a limited number of printers that the slicer supports.You’ll need to purchase either a personal or commercial license, but you can take on a 30-day trial before you buy. Primary FeaturesThe primary features highlighted by the developer are mainly focussed on the support and infill functions. There are the obligatory automatic and custom supports as well as the ability to hollow or indeed add latticed infill. You also get functions such as mirroring and sizing, adding drainage holes, file import and export and others.FormWare 3D mirroring feature. Source: formware.coSome interesting additional features are the ability to add “floors” to your print area in order to increase the number of smaller models you can print at once. You can also auto orient your model to avoid important areas having to be aligned to the print bed. Pros and ConsPros: Has some interesting and fairly unique featuresFocussed on SLA printersCons: Aimed at more advanced usersNo free optionPricingFree 30-day trialPersonal License €129.95Commercial License €299.954.PrusaSlicerPrusaSlicer is a much more familiar return to a downloadable slicer, but this one actually covers both resin and SLA printers.Prusa was originally set up as a company in 2012 by hobbyist Josef Prusa who had designed a small range of FDM printers. The company has since grown massively and is now well established and respected in the 3D printing community. PrusaSlicer was firstly released as an edition of the Slic3r program under the guise of Slic3r PE (Prusa Edition) in 2016. Several regular updates and additions to this version then led to Prusa releasing the first incarnation of PrusaSlicer 2.0 in 2019. The current version is now PrusaSlicer 2.5Primary FeaturesPrusaSlic3r is primarily an FDM slicer and was initially designed for use solely with Prusa FDM printers. However, since releasing its own SLA printer, Prusa has now added a MSLA menu to allow resin slicing. In order to use the

Prusa Slicer 2.8.0 Download - FileHorse

Okay. But then another one in which I simply change the infill percentage dies immediately. Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software... Log in to be able to post Posted : 01/02/2023 2:18 pm RE: Prusa Slicer 2.6 Alpha 2 is available on Github Ok so it is rather a large software instability at this point, rather than a specific incompatibility with some settings. Log in to be able to post Posted : 01/02/2023 2:20 pm (@neophyl) Illustrious Member Topic starter answered: RE: Prusa Slicer 2.6 Alpha 2 is available on Github I noticed a couple of people reporting crashes on slicing and on at least 2 of those the problem was duplicated and confirmed by the devs and the cause found which would only crop up with certain geometries so I'd expect a fair few of these to start with. Wonder how long it will be until alpha 3 lol Log in to be able to post Posted : 01/02/2023 2:23 pm (@foxrun3d) Illustrious Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github In my hands this has been a surprisingly unstable alpha on just basic operations (I've hardly looked at any of the new stuff). Maybe they did some major refactoring on how they implement modifiers but I didn't see anything mentioned in the release notes. Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software... Log in to. Download the archive, then run PRUSA Slicer. In PRUSA Slicer Help- Show COnfiguration Folder. This will expose the configuration folders PRUSA Slicer uses. QUIT PRUSA SLICER. Here’s a simple comparison of Orca Slicer with other popular slicers like Cura, Prusa Slicer, Bambu Studio, and Super Slicer. Feature: Orca Slicer: Cura: Prusa Slicer:

Prusa Slicer 2.7.1 Download - FileHorse

Unexpected surprise. While they may not have hit the more long running bugbears there were more fixes than I thought there would be. Log in to be able to post Posted : 01/02/2023 2:43 pm RE: Prusa Slicer 2.6 Alpha 2 is available on Github Posted by: @neophyl For example I noticed MrB mentioned he couldn't do a hole in both parts of the cut so wanted to see what the issue was, but that seems to be down to the choice between Plug and Dowel. Plug does a post and hole and Dowel creates a hole in both parts and an extra printable connector piece. Yes, thanks. I just came back to mention this after further experimentation. It is stable for me as well. Log in to be able to post Posted : 01/02/2023 7:09 pm (@constructicon) Active Member RE: Prusa Slicer 2.6 Alpha 2 is available on Github I'm having trouble finding the "Avoid crossing curled overhangs" setting listed in the patch notes. It's not under the Print Settings>Quality section for me like the patch notes say. I also tried searching all of the settings for it and didn't see it. Is this a me issue, or is everyone missing it? Log in to be able to post Posted : 01/02/2023 7:56 pm RE: Prusa Slicer 2.6 Alpha 2 is available on Github Are you sure you didn't accidentally open v2.5? It's in 2.6a indeed: Log in to be able to post Posted : 01/02/2023 8:00 pm RE:

Prusa Slicer 2.5.2 Download - FileHorse

To install this version. Grab version 2.2.2 instead from here: (copy and paste the link There is a slim chance that 2.2.3 has been altered by 3rd party without Prusa Research permission/knowledge. In all likelihood it was just rushed and someone has skipped a step or posted a wrong file.Monday is just around the corner. Let's hope someone from Prusa will this thread and correct the exe posted. Log in to be able to post Posted : 10/03/2019 8:58 pm Re: Original Prusa Drivers & Apps - 2.2.3 An alternative to get this to install is to use powershell in the Administrator mode. Simply copy the poorly signed build of Slicer to an easy to get to location. Then open up powershell in Administrator mode (Best way to type in the Windows search and let it give you the indexed view). Then you will see a Blue DOS looking window. Simply navigate too the Slicer directory (EG: code d:\apps\slicer.exe) and then this gets around the issue and shoud install.But in reality the first thing that should alway happen is the signing of the app should be solid. After all this is the first issue you will encounter as an end user on Windows 10 with a signed in account to the cloud. Log in to be able to post Posted : 12/03/2019 4:27 am (@david-h-brown) Eminent Member Certificate was revoked. Re: Original Prusa Drivers & Apps - 2.2.3 The problem I'm getting with 2.2.3 is not that it's unsigned... it was signed by "Prusa Research s.r.o." on "‎Tuesday, ‎February ‎12, ‎2019 7:30:18 AM" but the certificate has been revoked by its certification authority, "StartCom Class 3 Object CA." Actually, the StartCom Certification Authority was revoked, apparently these were bad actors, doing things like issuing certs for github, so they were. Download the archive, then run PRUSA Slicer. In PRUSA Slicer Help- Show COnfiguration Folder. This will expose the configuration folders PRUSA Slicer uses. QUIT PRUSA SLICER. Here’s a simple comparison of Orca Slicer with other popular slicers like Cura, Prusa Slicer, Bambu Studio, and Super Slicer. Feature: Orca Slicer: Cura: Prusa Slicer:

Prusa Slicer 2.6.1 Download - FileHorse

Please provide release notes for stable versions Please provide release notes for stable versions Hi Prusa Slicer team, please have release notes for stable versions. For example, release notes for 2.7.0 that describes its changes from 2.6.1.Most users use only stable versions but the official release notes of 2.7.0 are relative to beta which is relative to an alpha and so on. Alphas and betas are part of the development process and are of interest mostly to testers and not for the general users community. For example, mentioning that a bug in the alpha or beta was fixed is of little interest to the general public. This topic was modified 1 year temu by zapta Log in to be able to post Opublikowany : 06/02/2024 2:54 am (@neophyl) Illustrious Member RE: Please provide release notes for stable versions This is mainly a user to user forum, please make all requests to the dev team on the Prusa slicer GitHub. They are unlikely to see such requests here. Log in to be able to post Opublikowany : 06/02/2024 6:04 am