Usb vid 0bda pid 818b rev 0200

Declared as float, java.lang.Float, double, java.lang.Double will accept any block that returns a number. Adds telemetry API method for setting display format Classic Monospace HTML (certain tags only) Adds blocks support for switching cameras. Adds Blocks support for TensorFlow Object Detection with a custom model. Adds support for uploading a custom TensorFlow Object Detection model in the Manage page, which is especially useful for Blocks and OnBotJava users. Shows new Control Hub blink codes when the WiFi band is switched using the Control Hub's button (only possible on Control Hub OS 1.1.2) Adds new warnings which can be disabled in the Advanced RC Settings Mismatched app versions warning Unnecessary 2.4 GHz WiFi usage warning REV Hub is running outdated firmware (older than version 1.8.2) Adds support for Sony PS4 gamepad, and reworks how gamepads work on the Driver Station Removes preference which sets gamepad type based on driver position. Replaced with menu which allows specifying type for gamepads with unknown VID and PID Attempts to auto-detect gamepad type based on USB VID and PID If gamepad VID and PID is not known, use type specified by user for that VID and PID If gamepad VID and PID is not known AND the user has not specified a type for that VID and PID, an educated guess is made about how to map the gamepad Driver Station will now attempt to automatically recover from a gamepad disconnecting, and re-assign it to the position it was assigned to when it dropped If only one gamepad is assigned and it drops: it can be recovered If two gamepads are assigned, and have different VID/PID signatures, and only one drops: it will be recovered If two gamepads are assigned, and have different VID/PID signatures, and BOTH drop: both will be recovered If two gamepads are assigned, and have the same VID/PID signatures, and only one drops: it will be recovered If two gamepads are assigned, and have the same VID/PID signatures, and BOTH drop: neither will be recovered, because of the ambiguity of the gamepads when they re-appear on the USB bus. There is

Home > life > Wireless Expert > How to query Bluetooth hardware PID/VID and identify Bluetooth by BlueSoleilSummary：How to query Bluetooth hardware PID/VID and identify Bluetooth by BlueSoleil Thereare hardware PID and VID in BlueSoleil software to identifythe Bluetooth hardware, if the Bluetooth adapter ID is not in BlueSoleilBluetooth driver identification library, it will not be able toidentify the corresponding hardware, it needsthe adapter ID corresponding to BlueSoleil Bluetoothdriver hardware base, and then get to Microsoft signature officiallyreleased. So we collect the corresponding hardware ID which is compatiblewith next version upgraded.1. Bluetooth hardware, ID querysystem ( PID/VID)Query mode, taking XP for example:1, right-clickMy Computer > DeviceManager / Management (equipment manager) > click the Bluetooth icon - > properties - > details - > Hardware ID2. findout C：\ProgramFiles\IVT Corporation\BlueSoleil\driver\usb\btcusb.inf，openthe text book then query3. Ifthere’s the ID, it means BlueSoleil is supported, and can be launched.Otherwise is not supported.4. Ifthe software ID is not supported, please send the software PID/VID to us service@1000moons.com.If the confirmationsupports hardware ID, BlueSoleil Bluetooth software still cannot start successfully, you will need to manually update the driver.A. Windows7/81).Right click on the computer, select the management / devicemanager, select Bluetooth driver2).Right click Update Driver3) 4) 5）If have any BlueSoleil driver, according to the selected, clicknext to complete update, the following figure:6)Click Have Disk, browse and select the C:\Program Files\IVTCorporation\BlueSoleil\driver\usb\btcusb.inf(32bit)/C:\Program Files(x86)\IVTCorporation\BlueSoleil\driver\usb\btcusb.inf(64bit),clickOK (this is the default installation path of BlueSoleil, if you changed your directoryplease modify to the new directory) 7) The next step will be updated to BlueSoleil then it will be started. (Credit: BlueSoleil_Gong)

For users or machines via GPO or Intune/OMA-URI.For Intune, currently printer protection supports Open Mobile Alliance Uniform Resource Identifier (OMA-URI) setting (Microsoft Endpoint Manager admin center: Devices -> Configuration profiles -> Create profile -> Platform: Windows 10 and later; Profile type: Templates -> Custom) only.Block people from printing via any non-corporate printerApply policy over machine:./Vendor/MSFT/Policy/Config/Printers/EnableDeviceControlApply policy over user:./Vendor/MSFT/Policy/Config/Printers/EnableDeviceControlUserThe CSP support string Data type with Value: Allow specific approved USB printersApply policy over machine:./Vendor/MSFT/Policy/Config/Printers/ApprovedUsbPrintDevicesApply policy over user:./Vendor/MSFT/Policy/Config/Printers/ApprovedUsbPrintDevicesUserThe CSP support string Data type with approved USB printer VID/PID via ‘ApprovedUsbPrintDevices’ property and the property supports multiple VID/PIDs via comma. Currently does not support wildcard.The following is a policy allowing printing if the USB printer VID/PID is either 03F0/0853 or 0351/0872 - :Block people from printing via any non-corporate printerApply policy over machine:Computer Configuration > Administrative Templates > Printer: Enable Device control Printing RestrictionsApply policy over user:User Configuration > Administrative Templates > Control Panel > Printers: Enable Device control Printing RestrictionsFollowing is an example of configuring the policy in Group Policy:Allow specific approved USB printersApply policy over machine:Computer Configuration > Administrative Templates > Printer: List of Approved USB-connected print devicesApply policy over user:User Configuration > Administrative Templates > Control Panel > Printers: List of Approved USB-connected print devicesFollowing is an example allowing printing if the USB printer VID/PID is either 03F0/0853 or 0351/0872:The policy events can be viewed in Microsoft 365 Defender and the Microsoft Defender Security Center via advanced hunting.Here is an advanced hunting query example:For more information, see our documentation: Microsoft

Realtek 8192FU Linux USB无线网卡驱动原始代码来源于: Internet Archive 。点击这里：下载原文件 。原始文档里说支持Linux内核版本2.6.18 ~ 5.1。但不支持 Linux 内核5.1+以上的版本，也不支持 RHEL/CentOS > 7.0以上的版本。经过多次修改后，在原来的基础上，增加了对 Linux 内核5.2 ~ 5.19 / 6.0 ~ 6.4 的支持，以及对 RHEL/CentOS 7.x/8.x的支持。目前已测试的Linux发行版及结果：已通过：Red Hat server 7.0;CentOS 7.0~7.9/8.3/8.4/8.5;Rocky Linux 8.4/8.5/8.6/9.0;Fedora 36-1.5 / 38-1.6;Ubuntu Server 16.04/18.04/20.04/21.04/21.10/22.04;Ubuntu Desktop 18.04/20.04/22.04;linux mint 20.1;kali 2021.1;archlinux 2021.09.01/2022.06.01/2022.08.05/2022.10.01;其他未测试的，如果内核版本符合上述要求，通常情况下是可以使用的，但不能完全肯定。使用方式安装内核头文件# ubuntu、kali 用户通过以下命令安装sudo apt install -y linux-headers-$(uname -r)# Arch 用户通过以下命令安装sudo pacman -S linux-headers# centos 用户通过以下命令安装sudo yum install -y kernel-headers-$(uname -r) kernel-devel-$(uname -r)# centos 7.x/8.x 的 yum 源通常只提供对最新发行版的支持，所以像CentOS 7.8等非最新发行版就需要手动到 下载rpm文件，然后进行手动安装安装编译器：# ubuntu、kali 用户通过以下命令安装sudo apt install make gcc bc# Arch 用户通过以下命令安装sudo pacman -S make gcc bc# centos 用户通过以下命令安装sudo yum install make gcc bc elfutils-libelf-devel然后进入驱动代码目录：编译并安装：make -j$(nproc)sudo make install装载到内核模块：注意：USB网卡上的LED指示灯可能不会闪烁，但是设备这时候可以使用了。查看USB接口列表：如果出现command not found的问题就需要先安装usbutils：# ubuntu 用户通过以下命令安装sudo apt install usbutils# Arch 用户通过以下命令安装sudo pacman -S usbutils# centos 用户通过以下命令安装sudo yum install usbutils查看USB设备信息：usb-devices | grep "Vendor=0bda ProdID=f192" -B2 -A5关键信息看最后一行: Driver=rtl8192fu 则说明该设备已经跟驱动匹配上了；Driver=(none) 则说明没有找到设备对应的驱动。驱动跟设备匹配成功的情况：ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=0bda ProdID=f192 Rev=02.00S: Manufacturer=RealtekS: Product=802.11n WLAN AdapterS: SerialNumber=60EE5CBDFDE9C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mAI: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192fu">T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=0bda ProdID=f192 Rev=02.00S: Manufacturer=RealtekS: Product=802.11n WLAN AdapterS: SerialNumber=60EE5CBDFDE9C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mAI: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192fu驱动匹配失败的情况：ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=0bda ProdID=f192 Rev=02.00S: Manufacturer=RealtekS: Product=802.11n WLAN AdapterS: SerialNumber=60EE5CBDFDE9C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mAI: If#=0x0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)">T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1P: Vendor=0bda ProdID=f192 Rev=02.00S: Manufacturer=RealtekS: Product=802.11n WLAN AdapterS: SerialNumber=60EE5CBDFDE9C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mAI: If#=0x0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)成功之后，就可以去配置无线网络了。驱动的卸载：sudo modprobe -r 8192fucd rtl8192fu/sudo make uninstall对 dkms的支持每次内核更新之后，驱动都需要手动重新编译安装，可能比较麻烦。使用dkms，可以在更新内核时自动完成驱动的编译和安装。安装内核头文件# ubuntu、kali 用户通过以下命令安装sudo apt install -y linux-headers-$(uname -r)# centos 用户通过以下命令安装sudo yum install -y kernel-headers-$(uname -r) kernel-devel-$(uname -r)# centos 7.x/8.x 的 yum 源通常只提供对最新发行版的支持，所以像CentOS 7.8等非最新发行版就需要手动到 下载rpm文件，然后进行手动安装安装编译器：# ubuntu、kali 用户通过以下命令安装sudo apt install make gcc bc# centos 用户通过以下命令安装sudo yum install make gcc bc elfutils-libelf-devel安装dkms# ubuntu、kali 用户通过以下命令安装sudo apt install build-essential dkms -y# centos 用户通过以下两条命令安装sudo yum install epel-release -ysudo yum install dkms -y使用：# 进入驱动源码目录cd rtl8192fu/# 赋予可执行权限sudo chmod a+x ./dkms-*# 使用 dkms安装驱动sudo ./dkms-install.sh# 然后将驱动装载到内核模块sudo modprobe 8192fu# 如果需要卸载驱动的话可以使用以下命令sudo modprobe -r 8192fusudo ./dkms-remove.sh