Virtualbox 4 0 0
Author: n | 2025-04-23
The following packages will be REMOVED: virtualbox-guest-dkms virtualbox-guest-utils virtualbox-guest-x11 0 upgraded, 0 newly installed, 3 to remove and 0 not
0 0 0 3 5 4 0 0 1 3 3 4 4 0 0 0 0 3 3 3 1 0 3 6 1 0 0 - fill-a
In Virtualbox version 4.3.26 I would like to install Ubuntu 16.04 client.The network configuration is adapter 1 : bridged adapter name : eth0adapter 2 : NATWith this configuration I do have internet access, but not to my local network.I tried : static-ip-in-virtualbox-machine-with-ubuntu-16-04 but when setting to host-only, I was not able to select any thing.I have read Virtualbox manual chapter 6 but could not find a solution.I have tried how to rename a network card but adding a rule did not work for me.In my other virtualbox clients I had to add in the client (Ubuntu) interfaces file (/etc/network/interfaces) with the result :# interfaces(5) file used by ifup(8) and ifdown(8)auto loiface lo inet loopbackauto eth1iface eth1 inet staticdns-nameservers 192.168.1.70 192.168.1.1address 192.168.1.66gateway 192.168.1.1And in the virtualbox network setting adapter 1 : bridged adapter, name : eth0With this configuration I have access to my local network and Internet with my other (Ubuntu 14.04) Virtualbox clients.The name system in Ubuntu 16.04 has altered, no eth0 anymore but by checking using ifconfig :me@vBox1b-client:~$ ifconfigenp0s3 Link encap:Ethernet HWaddr 08:00:27:9e:aa:c9 inet addr:192.168.1.78 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe9e:aac9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:41 errors:0 dropped:0 overruns:0 frame:0 TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4304 (4.3 KB) TX bytes:8988 (8.9 KB)enp0s8 Link encap:Ethernet HWaddr 08:00:27:17:a7:e6 inet addr:10.0.3.15 Bcast:10.0.3.255 Mask:255.255.255.0 inet6 addr: fe80::a16b:7a82:bf0b:7247/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1328 (1.3 KB) TX bytes:7953 (7.9 KB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:534 (534.0 B) TX bytes:534 (534.0 B)So with this info I changed my interfaces file into :# interfaces(5) file used by ifup(8) and ifdown(8)auto loiface lo inet loopbackauto enp0s3iface enp0s3 inet staticdns-nameservers 192.168.1.70 192.168.1.1address 192.168.1.66gateway 192.168.1.1I rebooted and indeed I had access to my local network, but not to Internet anymore.So in Virtualbox server I wanted to changed in adapter 1 with name : eth0 to enp0s3 but I could not change the name at all.The DNS seems to be ok.Local :ping mylocal.comPING mylocal.com (192.168.1.73) 56(84) bytes of data.64 bytes from 192.168.1.73: icmp_seq=1 ttl=64 time=0.961 msThe DNS can find the local IP address and the IP address does response.Internet (glocal):ping nu.nlPING nu.nl (62.69.166.254) 56(84) bytes of data.From 192.168.1.66 icmp_seq=1 Destination Host UnreachableAlso global the DNS can find the IP address, but the IP address does not response.The DNS server which is used :nslookup hostServer: 192.168.1.70Address: 192.168.1.70#53There might be a conflict with Virtualbox MAC addresses, so I refreshed them, in Virtualbox manager, but without result.I have three question :How it is. The following packages will be REMOVED: virtualbox-guest-dkms virtualbox-guest-utils virtualbox-guest-x11 0 upgraded, 0 newly installed, 3 to remove and 0 not Virtualbox 6 1 0 6 0 MultilingualVirtualbox 6.1Virtualbox 6 1 0 6Oracle VirtualBox 6.1 released. How to install Virtualbox 6.1 in Ubuntu 19.10 and Ubuntu 19.04. VirtualBox is a gen Download VirtualBox-6.0. Win.exe free. Oracle VM VirtualBox Size: 209Mb. Downloaded: 25,129. What's new in Oracle VM VirtualBox Build . DOWNLOAD Oracle VM VirtualBox Build for Windows. This enables Disqus, Inc. To process some of your. Virtualbox 6 1 0 8 0; 6'1 Tall; Virtualbox 6 1 0 8 0 Step 4: Extract the download Cloudera-quickstart-VM-5.8.0-0-virtualbox.zip. The extracted zip should have the Cloudera-quickstart-VM-5.8.0-0-Virtualbox-disk1.vmdk. The extracted zip should have the Cloudera-quickstart-VM-5.8.0-0-Virtualbox-disk1.vmdk. AddressTRACE 2014-07-21 19:05:25.387 [background-task-0-restart(0)] checking eth9, display name: WAN Miniport (IP)-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.387 [background-task-0-restart(0)] available addresses for eth9 is: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth9, child interfaces = java.net.NetworkInterface$1subIFs@4bc43b39)TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth9) finishedTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] sub address for eth9 is []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] found eth9, without valid addressTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checking eth10, display name: WAN Miniport (IPv6)-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] available addresses for eth10 is: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth10, child interfaces = java.net.NetworkInterface$1subIFs@400c420b)TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth10) finishedTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] sub address for eth10 is []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] found eth10, without valid addressTRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] child network interface (eth11,VirtualBox Host-Only Ethernet Adapter-QoS Packet Scheduler-0000) skipped, because skip_network_interfaces='[tap, vmnet, vnic, virtualbox]'TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] child network interface (eth12,VirtualBox Host-Only Ethernet Adapter-WFP LightWeight Filter-0000) skipped, because skip_network_interfaces='[tap, vmnet, vnic, virtualbox]'TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checking eth13, display name: Intel(R) PRO/1000 GT Desktop Adapter - VirtualBox Bridged Networking Driver Miniport-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] available addresses for eth13 is: []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checkNetworkInterface(parent = eth13, child interfaces = java.net.NetworkInterface$1subIFs@64c40106)TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checkNetworkInterface(parent = eth13) finishedTRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] sub address for eth13 is []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] found eth13, without valid addressTRACE 2014-07-21 19:05:25.390 [background-task-0-restart(0)] checking eth14, display name: Intel(R) PRO/1000 GT Desktop Adapter - VirtualBox Bridged Networking Driver Miniport-WFP LightWeightComments
In Virtualbox version 4.3.26 I would like to install Ubuntu 16.04 client.The network configuration is adapter 1 : bridged adapter name : eth0adapter 2 : NATWith this configuration I do have internet access, but not to my local network.I tried : static-ip-in-virtualbox-machine-with-ubuntu-16-04 but when setting to host-only, I was not able to select any thing.I have read Virtualbox manual chapter 6 but could not find a solution.I have tried how to rename a network card but adding a rule did not work for me.In my other virtualbox clients I had to add in the client (Ubuntu) interfaces file (/etc/network/interfaces) with the result :# interfaces(5) file used by ifup(8) and ifdown(8)auto loiface lo inet loopbackauto eth1iface eth1 inet staticdns-nameservers 192.168.1.70 192.168.1.1address 192.168.1.66gateway 192.168.1.1And in the virtualbox network setting adapter 1 : bridged adapter, name : eth0With this configuration I have access to my local network and Internet with my other (Ubuntu 14.04) Virtualbox clients.The name system in Ubuntu 16.04 has altered, no eth0 anymore but by checking using ifconfig :me@vBox1b-client:~$ ifconfigenp0s3 Link encap:Ethernet HWaddr 08:00:27:9e:aa:c9 inet addr:192.168.1.78 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe9e:aac9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:41 errors:0 dropped:0 overruns:0 frame:0 TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4304 (4.3 KB) TX bytes:8988 (8.9 KB)enp0s8 Link encap:Ethernet HWaddr 08:00:27:17:a7:e6 inet addr:10.0.3.15 Bcast:10.0.3.255 Mask:255.255.255.0 inet6 addr: fe80::a16b:7a82:bf0b:7247/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1328 (1.3 KB) TX bytes:7953 (7.9 KB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:534 (534.0 B) TX bytes:534 (534.0 B)So with this info I changed my interfaces file into :# interfaces(5) file used by ifup(8) and ifdown(8)auto loiface lo inet loopbackauto enp0s3iface enp0s3 inet staticdns-nameservers 192.168.1.70 192.168.1.1address 192.168.1.66gateway 192.168.1.1I rebooted and indeed I had access to my local network, but not to Internet anymore.So in Virtualbox server I wanted to changed in adapter 1 with name : eth0 to enp0s3 but I could not change the name at all.The DNS seems to be ok.Local :ping mylocal.comPING mylocal.com (192.168.1.73) 56(84) bytes of data.64 bytes from 192.168.1.73: icmp_seq=1 ttl=64 time=0.961 msThe DNS can find the local IP address and the IP address does response.Internet (glocal):ping nu.nlPING nu.nl (62.69.166.254) 56(84) bytes of data.From 192.168.1.66 icmp_seq=1 Destination Host UnreachableAlso global the DNS can find the IP address, but the IP address does not response.The DNS server which is used :nslookup hostServer: 192.168.1.70Address: 192.168.1.70#53There might be a conflict with Virtualbox MAC addresses, so I refreshed them, in Virtualbox manager, but without result.I have three question :How it is
2025-03-26AddressTRACE 2014-07-21 19:05:25.387 [background-task-0-restart(0)] checking eth9, display name: WAN Miniport (IP)-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.387 [background-task-0-restart(0)] available addresses for eth9 is: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth9, child interfaces = java.net.NetworkInterface$1subIFs@4bc43b39)TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth9) finishedTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] sub address for eth9 is []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] found eth9, without valid addressTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checking eth10, display name: WAN Miniport (IPv6)-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] available addresses for eth10 is: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth10, child interfaces = java.net.NetworkInterface$1subIFs@400c420b)TRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] checkNetworkInterface(parent = eth10) finishedTRACE 2014-07-21 19:05:25.388 [background-task-0-restart(0)] sub address for eth10 is []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] found eth10, without valid addressTRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] child network interface (eth11,VirtualBox Host-Only Ethernet Adapter-QoS Packet Scheduler-0000) skipped, because skip_network_interfaces='[tap, vmnet, vnic, virtualbox]'TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] child network interface (eth12,VirtualBox Host-Only Ethernet Adapter-WFP LightWeight Filter-0000) skipped, because skip_network_interfaces='[tap, vmnet, vnic, virtualbox]'TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checking eth13, display name: Intel(R) PRO/1000 GT Desktop Adapter - VirtualBox Bridged Networking Driver Miniport-QoS Packet Scheduler-0000TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] available addresses for eth13 is: []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] non loopback/ipv4 addresses: []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checkNetworkInterface(parent = eth13, child interfaces = java.net.NetworkInterface$1subIFs@64c40106)TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] checkNetworkInterface(parent = eth13) finishedTRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] sub address for eth13 is []TRACE 2014-07-21 19:05:25.389 [background-task-0-restart(0)] found eth13, without valid addressTRACE 2014-07-21 19:05:25.390 [background-task-0-restart(0)] checking eth14, display name: Intel(R) PRO/1000 GT Desktop Adapter - VirtualBox Bridged Networking Driver Miniport-WFP LightWeight
2025-04-16How this works on MacOSWatch Video: OS X 1.11 El Capitan from Apple VirtualBox 6.1.4Install the VirtualBox Extension PackCreate a Virtual Machine named EXACTLY "OS X El Capitan"change RAM to 4GBchange CPU cores to 2DO NOT start the virtual machine!!# Clone this gist as 'mac-os-el-capitan-installer'git clone ./mac-os-el-capitan-installer# Move into the 'mac-os-el-capitan-installer' folderpushd ./mac-os-el-capitan-installer# Download the full El Capitan installer (free and legal, direct from Apple)# and convert the downloaded pkg to an ISObash mac-os-el-capitan-pkg-to-iso.sh# Add Apple-specific values and recommended VirtualBox settingsbash virtualbox-el-capitan.shNow it is okay to start the virtual machine and select the disk image.ISO PropertiesThe empty image (included in this repo):./empty.7900m.dmg: Apple Driver Map, blocksize 512, blockcount 16179200, devtype 0, devid 0, driver count 0, contains[@0x200]: Apple Partition Map, map block count 2, start block 1, block count 63, name Apple, type Apple_partition_map, valid, allocated, contains[@0x400]: Apple Partition Map, map block count 2, start block 64, block count 16179136, name disk image, type Apple_HFS, valid, allocated, readable, writable, mount at startupThe final image (all files copied over):./elcapitan.iso: Apple Driver Map, blocksize 512, blockcount 16179200, devtype 0, devid 0, driver count 0, contains[@0x200]: Apple Partition Map, map block count 2, start block 1, block count 63, name Apple, type Apple_partition_map, valid, allocated, contains[@0x400]: Apple Partition Map, map block count 2, start block 64, block count 16179136, name disk image, type Apple_HFS, valid, allocated, readable, writable, mount at startupEl Capitan ChecksumsInstallOSX.dmgMD5 5040a59d785d7da609755244c4ed136cSHA1 21e45136e34c6f805e0f1977e38d6ff029a9a1e2SHA2 bca6d2b699fc03e7876be9c9185d45bf4574517033548a47cb0d0938c5732d59elcapitan.isoMD5 704e6246548b4c5670c49ab452f4b120SHA1 5286ee4185e0814b77df368830ca8f8ef832f4c0SHA2 6eeb5fa50411085564676bd446be82e579084f2a2c71f88fb9830c62c531f0eb
2025-04-14