Vivetool windows 11

The app is installed, you can use it to find and install unreleased features on your Windows computer. Here’s how to do it: Launch the ViVeTool using a desktop shortcut or from the Start menu. Click the Select Build drop-down in the top-left corner and select your Windows build. You can check Windows 11 build and version using the Settings app. ViVeTool GUI will now start looking for all the available features for the selected build. This may take a few minutes, so wait till the list is populated. ViVeTool GUI categorizes the available features into different categories, including Always Disabled, Always Enabled, Disabled by Default, Enabled by Default, and Modifiable. You can expand the category and select the feature to install. Next, select the feature you want to enable or disable. Alternatively, type the feature name in the search bar to find a specific feature. Click the Perform Action drop-down select Activate to enable the feature. Wait for the success message and click Close. If the changes are not immediately visible, restart Windows Explorer to apply the changes. In some instances, you may need to restart your PC to make the changes. To revert the changes or disable a feature, you can use the Deactivate Feature option available in ViVeTool. Here's how to disable a feature using ViVeTool: Launch ViVeTool GUI. Search and select the feature you want to disable. Click the Perform Action drop-down in the top-right corner. Select Deactivate Feature and click OK. Alternatively, you can also revert the feature to its default state. To do this, select the modified feature, click on Perform Action, and select Revert Feature to Default Values. The changes will take effect when you restart your computer next time. Here are a few new and lesser-known Windows features that you can enable using ViVeTool before anyone else: Enable Windows Copilot Using ViVeTool Enable the Home Section in the Settings App in Windows 11 Enable Instant Search Results in File Explorer in Windows 11 Enable the Enhanced Taskbar in Windows 11 Enable the Volume Mixer in the Action Center in Windows 11 The original version of ViVeTool is a command-line utility. While it offers similar functionality as the GUI version, it is an efficient way to enable and disable Windows features quickly. Here’s how to do it: Go to the ViVeTool page on GitHub. This lists all the releases of ViVeTools since its inception. Locate the latest version of ViVeTools. As of writing this, Version 1.6.2 is the latest stable release available, and version 1.7 is available as a pre-release. Click on Assets to view the download options. Next, click the ViVeTool.GUI.1.6.2.0.Portable.zip file (version may change with the new releases) to download the

ViVeTool is an open-source command-line tool to enable experimental but hidden features on your Windows computer. It is also available in a GUI version, which makes it much easier to enable or disable certain features on Windows. It allows you to try newer and unreleased features on your stable or developer Windows releases, such as the multi-tab feature in File Explorer or restore the classic Windows 11 context menu. But should you use ViVeTool? Let’s find out! ViVeTool is a third-party open-source C# library and console app to enable unreleased features on your Windows computer. You can also use it to restore or disable certain features. ViVeTool uses feature IDs, part of Windows Feature Management, a software-development practice, to identify the available features. You can then use the feature IDs to enable or disable certain features on your Windows computer by using the ViVeTool command-line or GUI utility. For example, if you want to remove the new search box and replace it with the classic search icon, you’ll need to run the ViVetool /disable /id:39263329 command using the ViVeTool command-line utility. The feature ID id:39263329 in the above command tells the ViVeTool and the subsequent API request which feature to toggle on your Windows computer. You can source the feature ID from the internet or by using the ViVeTool GUI version. That said, the feature ID description in the GUI version is mostly cryptic, so tread carefully. Once you have the feature ID, you can use the ViVeTool command-line or GUI version to enable or disable features on your Windows computer. ViVeTool doesn’t add new features on its own. It simply toggles the existing features to enable or disable them for your Windows system. However, since these features are experimental by nature, activating them may sometimes cause some issues. If you want to use ViVeTool on your daily driver, go through the Windows data backup and recovery options and proceed with the steps below. Ideally, use a virtual machine to test new features, and if found to be stable, apply them to your daily driver. ViVeTool GUI is the forked version of the ViVeTool command-line utility. It is less complicated to use and removes the hassle of executing commands or remembering them in the first place. The GUI version is available as an executable installer or portable version. Here’s how to install and use ViVeTool GUI on Windows. To download the ViVeTool GUI version: Go to the ViVeTool GUI page on GitHub. Download the latest version of the Setup.exe file available. You can also download a portable version if you prefer. Run the setup file and keep the default settings. Follow the on-screen instructions to install the app. Now that

--> Image: Shutterstock.com/PixieMe In the latest Canary build for Windows 11 Insider preview testers, Microsoft added a new section for system components within the settings app without mentioning it whatsoever. Even the release notes of Windows 11 build 25926 fail to mention the new feature, as Betanews reports. That’s no doubt by design, as you need to use external tools to find and enable the feature.New Windows 11 Canary build: Meet System Components The hidden section for system components, which Microsoft has added within the Settings app, can be activated with ViVeTool or Microsoft’s own leaked internal Staging Tool and offers a list of the applications and tools integrated in Windows 11 and additionally allows uninstalling many of them.Microsoft probably hasn’t yet talked about this new Settings page itself because it is still in a very early testing stage. That said, this is quite a welcome innovation for Windows 11. By grouping system applications and providing easy access to them, Microsoft simplifies the process for anyone who wants to remove unwanted elements from Windows 11.The move is in line with Microsoft’s recent overhaul of the Start menu, which introduced a system label for shortcuts to built-in applications. The company also recently made a similar change to the Microsoft Store.The new feature was not announced by Microsoft. Instead, it was spotted by PhantomOfEarth, a Twitter account with a strong track record of spotting new features in Windows Insider builds..Install test builds: How to test the new featuresMicrosoft is currently testing new features in the only recently introduced Canary channel of the Windows Insider Program. Canary builds receive new features very early on, so users can test them, but can also be very unstable accordingly. To participate in the Windows Insider Program, you need to register on the website and then follow the instructions to select the channel and install the preview version on your PC.Be aware that these Windows builds often contain bugs and can lead to serious problems, however. So do not install a Windows Insider preview build on a critical computer.Once you’re on the latest Windows 11 Insider Canary build, you’ll need to enable the System Components feature via the ViVeTool or Microsoft Staging Tool apps. Proceed as follows:Download the latest ViVeTool from GitHub and unzip it on your computer.Open the command prompt with administrator rights.Navigate to the directory where you unpacked the ViVeTool by entering the command “cd ” (replace with the actual path to the ViVeTool).Enter the following command and press Enter: vivetool /enable /id:44702824Restart the PC.You should now be able to activate the new feature in the settings in the Updates section.It works similarly with the Microsoft’s leaked internal Staging Tool. If you prefer to use

Tahukah kamu, dimulai pada Windows 11 Insider Build 22538, kamu bisa mengaktifkan task manager baru dengan menggunakan ViveTool loh, tentu task manager baru ini membawa banyak hal baru terlebih dari segi tampilan, berikut adalah sedikit cuplikannya. Nah keren dan bagus bukan?, jika kamu penasaran berikut adalah langkah yang dapat kamu lakukan untuk mengaktifkan Task Manager baru tersebut. Langkah 1. Pertama silahkan kamu download ViveTool pada halaman berikut. (Silahkan download versi paling baru ya). Langkah 2. Selanjutnya, silahkan extract file yang kamu download barusan. Langkah 3. Lalu, silahkan kamu buka Command Prompt as Administrator, dan silahkan kamu masuk ke folder dimana file yang kamu extract tersebut berada. Kamu bisa menggunakan contoh perintah berikut: cd C:\FOLDER\PATH\ViveTool-v0.2.1Langkah 4. Terakhir, jika kamu sudah selesai dan di Command Prompt sudah masuk ke directory dimana file yang kamu download tadi, silahkan kamu masukkan ketiga perintah berikut secara berurutan. vivetool addconfig 35908098 2vivetool addconfig 36898195 2vivetool addconfig 37204171 2Restart Windows 11 kamu dan sekarang kamu harusnya sudah mendapatkan Task Manager baru di system yang kamu gunakan. Sedikit informasi, perlu diingat bawah Task Manager baru ini masihlah berupa fitur dan perubahan experimental, jadi masih ada bug dan masalah yang mungkin akan kamu temukan, jadi selain para Insider yang hanya melakukan ujicoba dan main main saja, saya tidak merekomendasikan kamu melakukan langkah diatas jika kamu menggunakan Windows 11 tersebut untuk keperluan harian seperti pekerjaan utama dan lain lain (meski itu adalah Windows 11 Insider Preview 22538 sekalipun). Semoga artikel ini bermanfaat. Referensi : PureInfoTech Written by Penulis, Pengguna Windows 11, Elementary OS, dan Iphone SE 2020. Tag @gylang_satria di Disqus jika ada pertanyaan. Post navigation Previous Post Next Post

Windows 11 Taskbar menu with Task Manager option On Windows 11, you can now enable an option that brings back the Task Manager option to the Taskbar context menu. In previous versions of the operating system, the Taskbar right-click menu always included an option to open the Task Manager, but the option was then removed with the new version of Taskbar for Windows 11.After a number of feedbacks, Microsoft is now restoring the option starting with build 25211. However, it’s not an option widely available, which means that you need to enable it manually.If you want to get hands-on with the new feature, you can use a third-party tool called “ViVeTool” created by Rafael Rivera and Lucas on GitHub, to enable the option on your computer.This guide will teach you the steps to turn on the tabs feature on Windows 11.To bring back the Task Manager option to the Taskbar context menu, use these steps:Open GitHub website.Download the ViveTool-vx.x.x.zip file to enable the Task Manager option.Double-click the zip folder to open it with File Explorer.Click the Extract all button.Click the Extract button.Copy the path to the folder.Open Start.Search for Command Prompt, right-click the top result, and select the Run as administrator option.Type the following command to navigate to the ViveTool folder and press Enter:cd c:\folder\path\ViveTool-v0.3.1In the command, remember to change the path to the folder with your path.Type the following command to enable Task Manager option in the Taskbar context menu and press Enter:vivetool /reset /id:39072097Restart the computer.Once you complete the steps, right-clicking the Taskbar will open the context with the option to open the Taskbar settings page and Task Manager.If you change your mind, you can revert the changes with the same instructions, but on step No. 10, make sure to use these commands: vivetool /disable /id:39072097 and then restart the device. Mauro Huculak is a Windows How-To Expert and founder of Pureinfotech (est. 2010). With over 21 years as a technology writer and IT Specialist, Mauro specializes in Windows, software, and cross-platform systems such as Linux, Android, and macOS. Certifications: Microsoft Certified Solutions Associate (MCSA), Cisco Certified Network Professional (CCNP), VMware Certified Professional (VCP), and CompTIA A+ and Network+. Mauro is a recognized Microsoft MVP and has also been a long-time contributor to Windows Central. You can follow him on YouTube, Threads, BlueSky, X (Twitter), LinkedIn and About.me. Email him at [email protected].

Windows 11 Volume Mixer On Windows 11, you can now enable an early preview of the new Volume Mixer interface to control the system and app’s volume, and here’s how on build 25281 or higher releases available in the Dev Channel.You can access the new Volume Mixer from the Taskbar’s System Tray to quickly switch audio outputs, control individual app volumes, and enable additional features like Spatial Audio. You will still be required to perform a few more clicks, but you will no longer have to open the Settings app to change the app’s volume individually.Although this is a welcome addition, it doesn’t seem to be something completely original since the new Volume Mixer looks very similar to EarTrumpet, a third-party app that has been around for multiple years to offer the same volume control experience. The app was created by Former Microsoft engineer Dave Amenta and Microsoft MVP Rafael Rivera, and they pointed out the similarities on Twitter saying “oh snap. Microsoft is catching up to EarTrumpet.”The feature hasn’t officially been announced yet, instead, it’s one of the hidden items available on Windows 11 build 25281 (via @PhantomOcean3). If you want to get hands-on with the new volume controls, you can use a third-party tool known as “ViVeTool” created by Rafael Rivera and Lucas on GitHub to enable the new experience on your computer.This guide will teach you the steps to enable the Volume Mixer on Windows 11.To enable the new “Volume Mixer” interface on Windows 11, use these steps:Open GitHub website.Download the ViveTool-vx.x.x.zip file to enable the new Volume Mixer.Double-click the zip folder to open it with File Explorer.Click the Extract all button.Click the Extract button.Copy the path to the folder.Open Start.Search for Command Prompt, right-click the top result, and select the Run as administrator option.Type the following command to navigate to the ViveTool folder and press Enter:cd c:\folder\path\ViveTool-v0.3.1In the command, change the path to the folder with your path.Type the following command to enable the new “Volume Mixer” interface on Windows 11 and press Enter:Vivetool /enable /id:42106010Restart the computer.Once you complete the steps, you can access the Volume Mixer by clicking the sound icon in the System Tray and clicking the button next to the Sound slider.If you don’t have Windows 11 build 25281, you need to enroll in the Dev Channel using the “Windows Insider Program” settings from the “Windows Update” section. Once you enroll the device in the program, you can download build 25151 from the “Windows Update” settings by clicking the “Check for Updates” button, and then you can follow the steps outlined above.If you change your mind, you can revert the changes with the same instructions, but in step 10, make sure to use the vivetool /disable /id:42106010 command and then restart the device. Mauro Huculak is a Windows How-To Expert and founder of Pureinfotech (est. 2010). With over 21 years as a technology writer and IT Specialist, Mauro specializes in Windows, software, and cross-platform systems such as Linux, Android, and macOS. Certifications: