Reclaime

IMPORTANT NOTE: ReclaiMe Free RAID Recovery doesn't work with a single hard drive. RAID is a multiple-disk unit (see explanation), so if you have a single drive, you need ReclaiMe File Recovery. Choose ReclaiMe Free RAID Recovery It is absolutely freeNo adware, no spyware, no toolbars. Very simple to useno technical skill required at all Variety of output options Got awardsrecommendations, and reviews from trusted sources. Works with most common RAID types(RAID 0, RAID 5, RAID 10) High level of technical support Our RAID Recovery software works with Hardware RAID disk sets producing either the copy of the array or the parameter set. The copy of the array is either mounted directly or post-processed with TestDisk to rebuild partition table on the copy. Software RAID disk sets if the array members are identically aligned on all the disks, in a way similar to hardware arrays. NAS disk sets to produce parameters or images you can further use with ReclaiMe File Recovery, other data recovery software, or to mount them in Linux. ReclaiMe Free RAID Recovery works with most known NAS devices like QNAP, NETGEAR, Synology, Buffalo and others What ReclaiMe Free RAID Recovery gives ReclaiMe Free RAID Recovery is designed for recovering RAID configuration parameters like Disk order Block size Start offset and others IMPORTANT NOTE: Note that ReclaiMe Free RAID Recovery does not give you the ability to do file-by-file recovery. RAID Recovery only works with arrays in their entirety. Difference between ReclaiMe File Recovery and ReclaiMe Free RAID Recovery What are the hidden costs? RAID recovery is not finished when parameters are detected. Once the parameters are detected you have to either Write a copy of the RAID somewhere if all RAID's content is needed Use regular data recovery program if only some files are needed. If you

Data recovery software for recovering RAID parameters for use with RAID arrays, useful for rebuilding arrays after a faulty hard drive.ReclaiMe Free RAID Recovery is a freeware RAID recovery app and file recovery utility developed by ReclaiMe for Windows, it's well-designed and easy-to-use. The download has been tested by an editor here on a PC and a list of features has been compiled; see below. We've also created some screenshots of ReclaiMe Free RAID Recovery to illustrate the user interface and show the overall usage and features of this RAID recovery program.RAID recovery software which recovers ROAD parameters ReclaiMe Free RAID Recovery is absolutely free and easy-to-use RAID recovery software for most common RAID types: RAID 0, RAID 5, RAID 6, RAID 0+1, RAID 1+0, and RAID 1E. The program recovers the following RAID parameters: start offset and block size, number of member disks, member disk and data order, parity position and rotation. Once you recovered the parameters using ReclaiMe Free RAID Recovery, you can run ReclaiMe data recovery software to recover data from the array; create the array image file; write the array to disk; save layout to the XML file; get the instructions and recover data using other data recovery software. ReclaiMe Free RAID Recovery works with hard drives (internal and external), disk image files, hardware and software RAIDs.Features of ReclaiMe Free RAID RecoverySupports all hard drives (internal and external).Supports disk image filesSupports disks from hardware and software RAIDs.Supports disks from most all NAS devices.Variety of output optionsVery simple to use - no technical skill required at all.Works with most common RAID types (RAID 0, RAID 5, RAID 10).Compatibility and LicenseReclaiMe Free RAID Recovery is provided under a freeware license on Windows from file recovery software with no restrictions on usage. Download and installation of this PC software is free and Build 1520 is the latest version last time we checked.What version of Windows can ReclaiMe Free RAID Recovery run on?ReclaiMe Free RAID Recovery can be used on a computer running Windows 11 or Windows 10. Previous versions of the OS shouldn't be a problem with Windows 8

Opened and have disk removed and added.Label disks (bay they were in) so you can put them back in the same order etc.Remove disks.Attach all disks to a Windows PC carefully.You will need to install/attach an additional disk to copy data to.As we will be using Windows software (ReclaiMe), we need a running Windows installation. It is possible to use SATA and USB ports in any combination to attach the NAS disks. Although SATA is a more preferable option, not every computer has four or six SATA ports available. You can use an inexpensive USB hard disk enclosures, a SATA to USB adapter or attach SATA disks to the motherboard directly. Once you have the recovery PC set up (the beefier the hardware, the better) you can start using ReclaiMe.Not enough SATA ports? Use an adapter to connect to USB.The NAS data recovery procedureDownload and install ReclaiMe File RecoveryRun ReclaiMeIdentify and select the NAS volume you need to recover. It will be listed under the “Linux MD RAID” or “Linux LVM” section. Pick the largest one!Click StartIf you can’t see the array in ReclaiMe, then download ReclaiMe Free RAID Recovery software and determine the array configuration parameters. Note that to recover the RAID configuration you need to know what RAID type was used in your NAS. When the parameters are determined, click “Run ReclaiMe to recover data” in ReclaiMe Free RAID Recovery tool and back here.Browsing, previewing and selecting your files.Wait until ReclaiMe already starts displaying your files. As the

Data recovery from an array, the entire recovery process consists of two stages:Restoring array parameters. File system recovery. To recover data from a Fujitsu RAID array, you will need: Disconnect the drives from the Fujitsu controller. Be sure to label the disks and remember which disk was inserted into which connector from the Fujitsu controller. Connect the disks from the array to the Windows computer. It is recommended to connect the drives directly to the motherboard. However, if there are not enough ports on the motherboard, you can use special USB-to-SATA adapters. Check all connections carefully and turn on the computer. Download, install and run ReclaiMe Free RAID Recovery. Select all drives from the array and start scanning the RAID type you used. If you don't remember what type of array was used, you'll have to spend extra time because you'll have to brute-force. Wait until the program detects the array configuration. Next, we proceed to the second stage of recovery. In the ReclaiMe Free RAID Recovery window, select the “Run ReclaiMe to recover files” option. If ReclaiMe File Recovery is not installed on your computer, you will be offered to download it. If the software is installed, it will immediately open in RAID recovery mode. In the ReclaiMe software window, select a volume from the array and click Start. Wait until you receive a message that “Initial scan is completed” and start checking the recovery result. If the data is displayed correctly in the Preview window, then buy an Ultimate license. Prepare additional space where you will copy the recovered data and save all the data you need. If ReclaiMe Free RAID Recovery was unable to restore the array configuration or the recovered data is not displayed correctly, then please contact us and we will try to help. Still

In fact, RAID 0 is hardly a true RAID because it lacks redundancy. This RAID level uses a striping technique. The data is divided into blocks of a certain size and evenly distributed across disks. You need at least two disks to create a RAID 0 array, A significant disadvantage of this array is the lack of fault tolerance. If one of the disks fails, you won't be able to recover RAID 0 array data. RAID 0 is often used in 2-bay Buffalo NASes. The detailed procedure for recovering data from a Buffalo NAS is described on this page. If your NAS uses a RAID 0 array, but the disks are working fine and data is lost due to user error, controller or software failure, you can still recover data within DIY approach using special software like ReclaiMe File Recovery. Pull all the disks out of your NAS device and connect them to a Windows PC. It's better to connect the disks directly to a motherboard using SATA ports. If there are not enough SATA ports, use USB-to-SATA adapters. Download and install ReclaiMe File Recovery software to the PC. Select the NAS volume you want to recover and click the Start button. If you have a NETGEAR or Synology NAS, your volume will be under the BTRFS section; other NAS volumes typically appear under the Linux md-raid or Linux LVM sections. Wait till ReclaiMe File Recovery software starts displaying recovered data. Select some files and check the result of the recovery in the Preview window. If the result is good, purchase a license key and save the recovered data to another disk. If you just need to recover deleted NAS data you don't have to pull the disks out of the NAS device. Simply download ReclaiMe NAS Recovery software to your computer, select your NAS, connect to it by entering your login and password, select the NAS volume for recovery, wait for the deleted data to be displayed, and check the recovery result in the Preview window. If the data looks good, buy a license key and copy your files to another drive. You can find more information on the page - how to recover deleted files from a NAS device. If ReclaiMe NAS Recovery software does not show the NAS volume, the RAID 0 configuration is most likely corrupted. In this case, you first need to recover the array parameters, such as: the number of member disks in the array, disk order and which disk was first in the array, block size, start offset on disks. All these parameters can be determined using a special software – ReclaiMe Free RAID Recovery: Download and run ReclaiMe Free RAID Recovery software. Select all disks and click the Start RAID 0 button. Once the RAID 0 parameters have been determined, download and run ReclaiMe File Recovery software. If it is already installed to your computer, the software will open in RAID recovery mode and shows all partitions on the RAID0. Also, you